Pallet, skid or crate? A freight packaging guide for shippers
Choose a pallet, skid or crate for industrial freight. Compare handling, protection, stackability and packed dimensions before booking partial or full truckload.
By Throughline Systems · · 10 min read
What matters for your next load
- Choose the base that supports and can be handled with the actual load, then decide what protection the product needs around it.
- A crate is not automatically stackable, weatherproof or ready for highway transport. Confirm each requirement separately.
- Quote the finished package: outer dimensions, gross weight, handling access and restrictions. Recheck equipment fit when packaging changes.
Start with what the product needs to survive
For a manufacturer shipping a pump assembly, a distributor moving boxed components or a building-material supplier sending finished millwork, the packaging choice changes more than appearance. It affects how the shipment can be lifted, what can touch it, how much floor space it occupies and whether the receiver can unload it intact. Decide these requirements before requesting a final freight option.
Begin with the product drawing, packed weight and handling instructions. Identify fragile projections, finished surfaces, moving parts, unsupported spans and any center-of-gravity concerns. Ask the manufacturer or packaging supplier which parts may carry weight and which must remain clear. The goal is a package suited to the product and the planned journey, with a usable loading and unloading method at both ends.
This guide addresses domestic truck-freight planning. It is a buyer's decision aid, not a design specification for a pallet, crate, lifting device or restraint system. A heavy, unusually shaped or sensitive item needs a packaging and handling plan from people qualified for that particular load.
Compare the base and the enclosure separately
For this comparison, a pallet is a handling platform, a skid is a runner-supported base often built around a particular item, and a crate adds a protective structure around a load. Suppliers use these terms differently, and a crate may sit on either kind of base. Request a drawing or photographs instead of treating the name as a capacity or handling specification.
The choice is not always one of three mutually exclusive products. A custom skid can support a machine while a removable crate protects its controls. A pallet can carry cartons that need no rigid enclosure. Specify the base, product attachment and protective enclosure as separate parts of the packaging request.
| Option to evaluate | Useful starting point | What the buyer must confirm |
|---|---|---|
| Palletized load | Cartons, bins or components that can form a supported handling unit | Base capacity for the actual load and support conditions; product containment; fork entry; any overhang |
| Custom skid | A machine or assembly needing a tailored support footprint or attachment points | Support locations, load distribution, attachment details and an agreed lifting/handling method |
| Crated load | Parts needing a protective enclosure around vulnerable surfaces or projections | Internal restraint, cushioning where specified, base strength, access panels and moisture requirements |
| Skid or pallet plus removable enclosure | A product needing both a designed base and access during installation or unloading | Which panels can be removed, when removal is allowed, and how the remaining unit stays stable |
Sources: FedEx Freight packaging guidelines: platform terminology and packaging considerations
Match the package to the handling equipment
A package can fit through a trailer door and still be unsuitable for the available unloading method. Confirm which sides accept forks, the usable entry openings, the loaded center of gravity and whether the package can be approached from the required direction. A receiver saying it has a forklift is only the start of that conversation.
OSHA's powered-industrial-truck requirements call for stable or safely arranged loads and handling within the truck's rated capacity. The regulation's nonmandatory Appendix A explains how load position and load center affect capacity and stability. For the shipper, the practical step is to give the receiving team the complete package details so its qualified operator can check the actual machine, attachment and handling conditions.
Do not assume a skid that accepts forks also works with a pallet jack, or that either end of a long crate can be used for lifting. If crane access is needed, have the appropriate load specialist specify lifting points and the plan before packing. Keep lifting instructions distinct from tie-down instructions; an attachment point should not be treated as interchangeable without confirmation.
Sources: 29 CFR 1910.178: powered industrial trucks, loading requirements and nonmandatory stability appendix
Packaging protection and truck securement do different jobs
Packaging holds and protects the product as a handling unit. The vehicle's cargo-securement arrangement controls the load during transport. Stretch wrap, a wooden enclosure or a label does not by itself establish that the finished unit is properly secured to the vehicle.
Under 49 CFR 393.106, cargo must be firmly immobilized or secured on or within the vehicle using adequately strong structures or suitable restraint systems. Certain cargo has additional requirements. Have the carrier and the appropriate load specialist confirm the restraint plan for the actual package and equipment.
Before closing a crate, confirm how the product is held inside it and how the finished unit can be restrained without crushing panels or damaging the product. Preserve access to designated attachment points if the plan requires it. An enclosed trailer provides a different exposure environment from an open deck, but the enclosure alone is not a substitute for a cargo-securement plan.
Define moisture protection separately. Tell the packaging supplier about weather exposure, outdoor staging, sensitive finishes and storage before or after transit. Ask what protection the proposed package actually provides and under what conditions. Do not describe an ordinary crate, stretch wrap or tarp as waterproof without a suitable specification.
Sources: 49 CFR 393.106: general requirements for cargo securement
Treat stackability as a written condition
A flat crate top does not prove that another load can sit on it. Ask the packaging designer whether stacking is permitted, what load can be supported, where it must bear and whether that permission applies during transport or only in storage. If no suitable stacking specification is available, disclose that uncertainty and request a non-stackable plan until it is resolved.
Separate three questions: can this package support another load; can this package be placed on another load; and must it remain upright? A simple yes/no field may not convey all three. Put any conditional permission in the shipment notes and ask for it to be carried into the agreed transport instructions.
Non-stackable freight is not automatically a full truckload. A partial arrangement may still be possible if the required floor space, compatibility and handling plan work. It is also not automatically acceptable on a shared vehicle. Request options using the real restriction, then compare the proposed service and equipment. There is no universal savings figure or pallet-count threshold that settles that decision.
Measure the package that will actually travel
Use maximum outside length, width and height in the shipping orientation. Include the base, runners, protective frame, handles and any projections. State the units and measure each differently sized piece. Gross weight must include the product and its packaging; keep the product's net weight separately if useful.
Hypothetical example: a machine measures 70 by 42 by 58 inches before packing. Its completed skid and crate measure 78 by 50 by 66 inches and weigh 2,850 pounds gross. The quote request should use the latter dimensions and weight. This example illustrates what to measure; it does not establish a package design or confirm fit in any truck.
Adding a crate after quoting can change trailer clearance, loading access, floor-space use and the payload available for the shipment. Before approving the packaging change, give the new details to the transport provider and ask it to reconfirm the proposed equipment. This is especially relevant when an urgent shipment was first considered for a sprinter.
| Information | Useful detail to provide | Decision it supports |
|---|---|---|
| Finished size and weight | Maximum outer L × W × H, units and gross weight for each piece | Door/deck clearance, payload and occupied space |
| Handling access | Fork-entry sides/openings; approved lift method; relevant drawing | Origin and destination equipment compatibility |
| Restrictions | Upright-only, non-stackable, no top loading or defined conditional stacking | Positioning and compatibility with other freight |
| Protection | Sensitive surfaces, weather/storage exposure and package specification | Enclosed versus open-deck discussion and packaging preparation |
| Service needs | Transfer/handling limits and required pickup/delivery windows | Whether the proposed partial, FTL or expedited service suits the load |
Sources: XPO measuring tips: including pallet dimensions and weight
Three hypothetical buying decisions
Boxed replacement components for a distributor: start by evaluating a palletized handling unit. Confirm carton support, containment, stackability and receiving equipment before adding a crate by default. If shared service is proposed, ask about handling and transfers and compare that plan with the product's requirements.
An irregular pump assembly for a manufacturer: a custom skid may provide the needed support footprint, while a protective enclosure may be appropriate around exposed controls. The packaging supplier needs the assembly's weight distribution and approved support/attachment information. The transport provider needs the finished dimensions and an accessible restraint plan. Calling it one skid does not communicate those details.
Finished architectural millwork going to a project receiver: a protective frame or crate may help address vulnerable edges and surfaces, but the receiver must still be able to handle the finished unit. Confirm whether packaging stays in place through unloading and who removes it. A larger protective enclosure may alter the loading method or equipment choice; review that consequence before releasing the package.
These are planning examples, not recommendations for a particular product design. The useful comparison is the complete package-and-transport arrangement: packaging work, handling compatibility, required space and the agreed service. A cheaper empty base is not enough information to compare the alternatives.
Build a packaging handoff the next team can use
Give the packaging supplier, shipping team, transport provider and receiver the same final revision. If a size, support condition or loading instruction remains unconfirmed, name the owner who must resolve it before the load is released. Photographs are useful context, but they do not replace measured dimensions, weights or a technical specification.
Common mistakes include reusing a base without checking its condition and suitability; quoting only the product dimensions; assuming a crated item can take top freight; hiding restraint access behind fixed panels; and discovering at delivery that the available handling equipment cannot approach the package. Resolve those mismatches while the package can still be changed.
- Record the package revision, piece count, outer dimensions and gross weight, with units.
- Identify the approved handling method, access sides, orientation and any special instructions from the manufacturer or packaging designer.
- State stackability, exposure protection and restrictions on contact, transfers or rehandling.
- Confirm origin and destination equipment, trained personnel and unloading access with the responsible teams.
- Share package photographs and relevant drawings, including any designated lift or restraint access.
- Reconfirm the freight option when the package changes; keep the final requirements with the shipment record.
Request a freight option around the finished package
Once the package is defined, use Get a quote with the lane, cargo, required dates and finished shipment details. Include handling and stacking restrictions in the request, and identify anything still awaiting confirmation. Review the proposed equipment and service against those requirements before approving the arrangement.
Throughline's public machinery page and equipment guide provide context for the freight discussion. Use the related guides for flatbed versus step deck, partial versus full truckload and urgent sprinter fit when those decisions apply. Packaging design and technical load-handling approval should remain with the people responsible for the product and its handling; a freight quote is not a packaging certification.
Questions from freight buyers
What is the difference between a pallet, a skid and a crate?
A pallet is a handling platform; a skid is commonly a runner-supported base; a crate adds a protective structure around the product. Names vary by supplier, and a crate can use a pallet or skid base. Specify the construction, support, handling access and protection you need instead of relying on the label.
Does crating make a shipment stackable?
No. Obtain the packaging designer's stacking conditions, including permitted load, bearing locations and whether they apply during transport. A flat top or wooden sides alone do not establish capacity. Disclose non-stackability when a suitable stacking specification is unavailable.
Can non-stackable crated freight move as a partial shipment?
It may, if the available equipment, floor space, other freight and handling plan are compatible. State the restriction before quoting and ask how the proposed service will accommodate it. Non-stackability alone does not establish either partial-service acceptance or a need for FTL.
Should the quote use product dimensions or packed dimensions?
Use the finished package's maximum outside dimensions and gross weight, including its base and protective materials. If packing is not complete, clearly label estimates and reconfirm the freight option once measured final values are available.
Does a crate replace straps, blocking or other truck securement?
A protective enclosure does not by itself establish an adequate vehicle cargo-securement arrangement. Confirm both internal product restraint and the finished unit's transport-securement plan with the carrier and appropriate load specialist.
Can the receiver unload a skid with a pallet jack?
Do not assume so. The base geometry, fork openings, load, surface and handling equipment must be compatible. Give the receiver the actual package details and have its responsible team confirm the method before booking.
Sources and editorial notes
Original analysis by Throughline Systems. Source links may show newer releases after this article’s publication; the observation and issue dates below identify the material used. Agency citations do not imply endorsement.
- FedEx Freight packaging guidelines: platform terminology and packaging considerations
Undated carrier guide; current 16-page public PDF retrieved October 28, 2026. Carrier-specific acceptance limits are not Throughline requirements.
Accessed .
- 29 CFR 1910.178: powered industrial trucks, loading requirements and nonmandatory stability appendix
U.S. eCFR Title 29 edition current through October 26, 2026; loading paragraphs (o)(1)–(3) and nonmandatory Appendix A. Edition date is not an amendment date.
Accessed .
- 49 CFR 393.106: general requirements for cargo securement
U.S. eCFR Title 49 edition current through October 26, 2026. Section history: September 27, 2002; amendments September 30, 2003 and June 22, 2006.
Accessed .
- XPO measuring tips: including pallet dimensions and weight
Undated carrier guidance retrieved October 28, 2026; cited for measurement practice, not as a universal FTL or partial pricing rule.
Accessed .