Resin · Gaylords · Bulk bags · Film and molded parts

Truckload shipping for plastic resin and finished plastics

Packaged plastic resin is dense, so a truckload of bagged pellets, gaylords or bulk bags usually reaches its weight limit before it fills the trailer. Finished plastics such as containers and molded parts do the opposite and fill the trailer first. Both need a clean, dry trailer, because wet or contaminated product gets rejected. Most common resins are not regulated for transport, but some are, and the product’s Safety Data Sheet says which. Throughline brokers packaged resin and finished plastics on dry vans, not bulk resin in hopper trailers.

No platform fee. No login required to estimate a lane. Nothing is booked without approval.

Licensed freight broker · MC-1819296 · USDOT 4573052 · $75,000 BMC-84 bond(855) 916-5957

For an accurate quote

Have these ready

  • Origin and destination, with appointment windows
  • Product, and whether it is regulated for transport
  • Bags, gaylords or bulk bags, unit count and weight per unit
  • Gross weight including pallets, or pallet count and height for light loads
  • Trailer cleanliness, securement and receiver requirements
Start my quote

Resin weighs out, finished plastics cube out

Resin pellets packed in bags, gaylord boxes or bulk bags are heavy for their size, so the load is planned around legal weight and how that weight sits on the axles. Give the gross weight including pallets and packaging, the number of units and the weight of each.

Finished plastics are the reverse. Bottles, totes, film-wrapped pallets of molded parts and foam usually fill the floor long before they get heavy, so the plan depends on pallet count, pallet height and whether pallets can stack. Rolls of film sit in between and can be heavy, so give roll weights as well as dimensions.

Clean trailers, torn bags and pellet spills

Resin is a raw material for someone else’s production line, so contamination matters. A wet floor, leftover debris or odor from a previous load can lead a receiver to refuse product that looks fine from outside. Say on the tender if the trailer must be clean, dry and odor-free, and whether the freight is shrink-wrapped.

A torn bag or a gaylord crushed by a forklift spills pellets that are hard to clean up and easy to lose. Ask the receiver to note damage and spills on the delivery receipt and take photos before signing, because a clean signature makes a later claim harder.

Is plastic resin hazmat?

Usually not, but the answer comes from the product, not the broker. Most common commodity resins are not regulated for transport. Some products are: expandable polystyrene beads, for example, can be listed as UN2211, Class 9. The shipper is responsible for classifying the product, and the transport section of the Safety Data Sheet, usually Section 14, shows any UN number, class and packing group from the Hazardous Materials Table in 49 CFR 172.101.

Non-regulated resin can be priced on the quote page right away. A regulated product goes through the hazardous-materials option on the quote form: Throughline does not put a model-generated price on hazmat, a person releases the number, and Class 9 materials in non-bulk packaging are reviewed load by load with a qualified carrier.

What to put on the tender

Requirements you can state on a Throughline quote or tender include:

  • Load bars, straps, blocking and bracing, or dunnage airbags to stop pallets shifting
  • Load locks or E-track inside the trailer
  • Shrink or stretch wrap, and palletizing or re-palletizing needs
  • Driver assist, and whether the appointment is firm
  • A clean, dry, odor-free trailer, and any receiver inspection rules

How a resin or plastics load runs with Throughline

Start on the quote page for an instant estimate with a low-to-high spread and a confidence level, email the load, or send a lane spreadsheet for repeat plant-to-processor lanes. Your requirements carry through to the rate confirmation and BOL. A firm quote stays good for 3 days. After that we refresh it, and live truck options can change the price. “Hold for me” is the default: no carrier is booked on your load without your OK.

Before any rate con goes out, we check active FMCSA authority and carrier identity, require at least $100,000 cargo and $750,000 auto liability insurance, match the carrier's phone to its FMCSA record, and screen against a library of known fraud patterns. Anything that can't be confirmed goes to a person — it doesn't go through.

After booking you hear when the carrier is assigned, at pickup with the driver’s name and mobile, if the load is running late, at delivery and when the POD is on file. When the POD is verified, your invoice arrives as one PDF with the POD and BOL attached.

Start with a lane estimate, then confirm the shipment details.

Price a resin or plastics lane
What changes when we run your truckload

Less chasing. Fewer surprises.

The same five commitments on every load, starting with the one that matters most here.

The carrier on the rate con is the carrier that shows up.

Before any rate con goes out we check active authority, verify identity, require at least $100,000 cargo and $750,000 auto liability, and flag “paper” carriers. Carriers with an Unsatisfactory FMCSA safety rating or an active out-of-service order are never dispatched, and a Conditional rating needs a manager’s sign-off. Bank-detail changes wait 48 hours.

  • Checked before the rate con
  • 48-hour hold on bank changes

Keep emailing your loads. We’ll take it from there.

Send tenders, quote requests or lane spreadsheets the way you do today. They become priced quotes and loads, and every tender gets a clear accept or decline.

  • No new portal to learn first
  • Clear accept / decline on tenders

If your load is at risk, you hear first — with choices.

When a truck isn’t confirmed as pickup nears, we email up to three options you can click: approve a revised rate, move pickup a day, or switch to a team truck. If a booked carrier misses pickup or drops the load, we start re-sourcing.

  • One-click choices by email
  • Re-sourcing on a no-show or fall-off

Stop asking where the truck is.

You hear when the carrier is booked, at pickup with the driver’s name and mobile, if it’s running late, at delivery, and when the POD is on file. Updates carry a no-login tracking link you can forward to your receiver, and a brief of your freight lands every Monday.

  • Driver name and mobile at pickup
  • No-login link for your receiver

Invoice and POD in one file.

When the POD is verified, your invoice arrives as one PDF with the POD and BOL attached. Your AP team gets the paperwork with the bill instead of asking for it.

  • Invoice + POD + BOL
  • Raised on delivery

“Hold for me” is the default: no carrier is booked on your load without your OK. A firm quote stays good for 3 days. After that we refresh it, and live truck options can change the price.

Straight answers

Questions shippers ask

Talk to a person
01

How do you ship plastic resin by truck?

+

Packaged resin in bags, gaylord boxes or bulk bags usually moves on a dry van, planned around weight because it is dense. Give the broker the unit count, the weight per unit, the gross weight with pallets and any trailer cleanliness rules, so the load is planned for weight and the receiver’s requirements.

02

Is plastic resin considered hazmat for shipping?

+

Most common resins are not regulated for transport, but some products are, such as expandable polystyrene beads, which can be classed as UN2211, Class 9. Check the transport section of the Safety Data Sheet, usually Section 14. The shipper is responsible for the classification. This is general information, not compliance advice.

03

Can Throughline move bulk resin in hopper trailers?

+

No. Throughline brokers packaged resin and finished plastics on dry vans. Bulk resin blown into pneumatic hopper trailers or railcars is a different service with different equipment, and it is not one Throughline books.

04

How many gaylords or bulk bags fit on a truckload?

+

It depends on the weight of each unit more than the floor space, because dense resin usually reaches the legal weight limit first. Send the unit count, the weight and dimensions of each, and whether they can stack, and the load can be planned before it is quoted.

05

What should I do if resin bags arrive torn or spilled?

+

Have the receiver note the damage and any spilled product on the delivery receipt, with the count, and take photos before signing. Cargo claims run to the carrier, and a clean signature makes them harder, so the note at the dock matters.

06

Do you ship finished plastic parts and containers?

+

Yes. Molded parts, containers, film and other finished plastics move as full truckloads or partials, usually on dry vans. These loads tend to fill the trailer before they reach the weight limit, so send pallet count, pallet height and whether the pallets stack.

A person approves the carrier

Price one real lane. No login.

Get my quote
Get my quoteCreate account