Weight limits · Payload · Axles · Heavy freight

How much weight can a full truckload carry?

On the Interstate system the federal limit is 80,000 pounds gross for the whole truck, with 20,000 pounds on a single axle and 34,000 on a tandem, subject to the bridge formula. The tractor and trailer weigh part of that, so the freight itself, the payload, is what is left. Throughline plans a 53-foot dry van at 44,000 pounds of payload. Heavier freight can move, but it needs the real weight up front and a truck chosen to carry it legally.

No platform fee. No login required to estimate a lane. Nothing is booked without approval.

Licensed freight broker · MC-1819296 · USDOT 4573052 · $75,000 BMC-84 bond(855) 916-5957

For an accurate quote

Have these ready

  • Origin and destination city or ZIP
  • Gross weight including pallets and packaging
  • Pallet count, dimensions and heaviest piece
  • Equipment preference, or ask for a recommendation
  • Pickup date and any seasonal road limits you know of
Start my quote

Gross weight, axle weight and payload

Three numbers matter, and only one of them is yours to control:

  • Gross vehicle weight: tractor, trailer, fuel, driver and freight together. The federal Interstate limit is 80,000 pounds.
  • Axle weight: how that total sits on each axle or axle group. The federal limits are 20,000 pounds on a single axle and 34,000 on a tandem.
  • Payload: the freight, including pallets and packaging. It is what remains after the truck’s own weight, so it varies from one tractor and trailer to the next.

Why a load can be overweight on an axle and legal on gross

The bridge formula limits how much weight a group of axles may carry based on how far apart they are, to protect bridges. In practice, a heavy load stacked at the nose of the trailer can overload the drive axles even when the total is under 80,000 pounds. The driver can slide the trailer tandems to shift weight, but only within limits.

That is why the pallet layout matters as much as the total for dense freight such as beverages, metals, paper rolls and building materials. Spread heavy pallets along the floor and tell the carrier the weight per position when it is uneven.

What a 53-foot dry van can carry

Most dry freight fills the floor before it reaches the weight limit. Dense freight does the opposite. Throughline plans a 53-foot dry van at 44,000 pounds of payload, a deliberately conservative figure. A load near or above that needs a check of the specific truck: a lighter tractor and trailer can carry more, and some cannot carry that much.

Throughline will not size equipment for a load without a weight. A recommendation built on a guess is how a truck ends up reworked at the scale.

State rules: Michigan and the Midwest

States set their own limits off the Interstate and can keep older, higher limits on it. Michigan is the best-known example: trucks with many axles can run far above 80,000 pounds gross under state law, up to 164,000 pounds on some configurations. Those are specialized trucks, not a standard five-axle tractor with a 53-foot van, so do not plan an ordinary truckload around them.

Michigan and Wisconsin also use seasonal weight restrictions while frozen ground thaws. They matter most for heavy loads that use local or restricted roads near the pickup or delivery.

What to send with a heavy quote request

Give the carrier what it needs to say yes once, not twice:

  • Gross shipment weight, including pallets and packaging, not just product weight
  • Pallet count, dimensions and the heaviest single piece
  • Whether the weight is even across the floor or concentrated
  • Any facility scale tickets you already have for this product
  • Pickup and delivery addresses, so local road limits can be checked

Start with a lane estimate, then confirm the shipment details.

Price a heavy load
What changes when we run your truckload

Less chasing. Fewer surprises.

The same five commitments on every load, starting with the one that matters most here.

The carrier on the rate con is the carrier that shows up.

Before any rate con goes out we check active authority, verify identity, require at least $100,000 cargo and $750,000 auto liability, and flag “paper” carriers. Carriers with an Unsatisfactory FMCSA safety rating or an active out-of-service order are never dispatched, and a Conditional rating needs a manager’s sign-off. Bank-detail changes wait 48 hours.

  • Checked before the rate con
  • 48-hour hold on bank changes

If your load is at risk, you hear first — with choices.

When a truck isn’t confirmed as pickup nears, we email up to three options you can click: approve a revised rate, move pickup a day, or switch to a team truck. If a booked carrier misses pickup or drops the load, we start re-sourcing.

  • One-click choices by email
  • Re-sourcing on a no-show or fall-off

Invoice and POD in one file.

When the POD is verified, your invoice arrives as one PDF with the POD and BOL attached. Your AP team gets the paperwork with the bill instead of asking for it.

  • Invoice + POD + BOL
  • Raised on delivery

Stop asking where the truck is.

You hear when the carrier is booked, at pickup with the driver’s name and mobile, if it’s running late, at delivery, and when the POD is on file. Updates carry a no-login tracking link you can forward to your receiver, and a brief of your freight lands every Monday.

  • Driver name and mobile at pickup
  • No-login link for your receiver

Keep emailing your loads. We’ll take it from there.

Send tenders, quote requests or lane spreadsheets the way you do today. They become priced quotes and loads, and every tender gets a clear accept or decline.

  • No new portal to learn first
  • Clear accept / decline on tenders

“Hold for me” is the default: no carrier is booked on your load without your OK. A firm quote stays good for 3 days. After that we refresh it, and live truck options can change the price.

Straight answers

Questions shippers ask

Talk to a person
01

How much weight can a full truckload carry?

+

The federal Interstate limit is 80,000 pounds gross for the whole truck, and the truck’s own weight comes out of that. What is left is the payload, which varies by tractor and trailer. Throughline plans a 53-foot dry van at 44,000 pounds of payload and checks the specific truck for anything heavier.

02

What is the weight limit for a 53-foot trailer?

+

The limit applies to the whole truck, not the trailer alone: 80,000 pounds gross on the Interstate system, 20,000 on a single axle and 34,000 on a tandem, subject to the bridge formula and state rules. Usable payload depends on what the tractor and trailer weigh.

03

Why did my load scale overweight when it was under 80,000 pounds?

+

Usually because one axle group was over its own limit. Heavy pallets loaded together at the front or back can overload the drive or trailer axles even when the total is legal. Spreading the weight along the trailer prevents it.

04

Can Michigan trucks carry more than 80,000 pounds?

+

Yes, on configurations with many axles, Michigan law allows gross weights well above 80,000 pounds, up to 164,000 pounds on some trucks. Those are specialized trucks. A standard truckload in a 53-foot van is planned around the federal limit.

05

Should I include pallet weight in the shipment weight?

+

Yes. Carriers and scales count everything on the trailer, so give the gross weight including pallets, packaging and dunnage. An understated weight leads to a rejected load or a rework at the scale.

06

What if my freight is too heavy for one truck?

+

Split it across trucks, or ask about equipment with more axles or a lighter tare weight. Send the total weight, piece weights and dimensions and the load can be planned before it is quoted.

07

Does weight change a truckload price?

+

It can. Heavy loads limit which trucks can take them and may need specific equipment, which changes the options available on that day. Pricing your exact lane with the real weight gives the most accurate estimate.

A person approves the carrier

Price one real lane. No login.

Get my quote
Get my quoteCreate account