Packaged beverages · Dry van · Reefer · Freeze protection

Beverage truckload shipping for heavy packaged freight

Canned and bottled beverages are dense, so a truckload usually reaches its weight limit before it fills the trailer. That makes accurate weights, pallet layout and axle limits the first planning questions. In winter, the next question is whether the product can freeze in transit. Throughline arranges packaged beverage truckloads on dry van and reefer equipment, but not bulk liquid in tankers.

No platform fee. No login required to estimate a lane. Nothing is booked without approval.

Licensed freight broker · MC-1819296 · USDOT 4573052 · $75,000 BMC-84 bond(855) 916-5957

For an accurate quote

Have these ready

  • Origin and destination city or ZIP
  • Product type, and proof if it contains alcohol
  • Gross weight with pallets, plus pallet count and stacking
  • Dry van or reefer, with setpoint and protect-from-freeze needs
  • Delivery appointment and any lumper or receiver rules
Start my quote

Why beverage loads weigh out first

Most dry freight runs out of floor space before it runs out of weight. Beverages often do the reverse. Federal limits on the Interstate system are 80,000 pounds gross, 20,000 pounds on a single axle and 34,000 pounds on a tandem, subject to the bridge formula and to state rules. Tractor and trailer weight comes out of that total, so usable payload varies by truck.

That is why a full-looking plan can still be overweight, and why two carriers may give different answers on the same pallet count. Share the real gross weight, including pallets and packaging, before the load is quoted.

Plan the pallet layout around the axles

A heavy load can be under the gross limit and still be over on one axle group. Where the pallets sit in the trailer matters as much as the total:

  • Spread weight along the trailer rather than stacking the nose or tail
  • Use single-stacked pallets where double stacking would put weight in the wrong place
  • Agree on who secures the load and whether load bars or straps are needed
  • Keep stretch wrap, tier sheets and pallet quality consistent, as dense product can shift
  • Ask for a scale ticket when a load is near the limit
  • Tell the desk early if the product is shipped floor loaded or on non-standard pallets

Protect beverages from freezing in winter

Water-based drinks can freeze on a Midwest lane, and a frozen can or bottle may burst or lose quality. A standard dry van offers no temperature control, so ask whether a load needs protection before you book it, not when the forecast turns.

A reefer unit can run in protect-from-freeze mode, which keeps product above freezing without continuous cooling. Include that requirement with your setpoint so it can be priced and passed to the carrier. Throughline’s carrier terms require running at the stated setting and producing a temperature download on request. We do not receive a live temperature feed.

Food safety and alcohol rules

FDA’s sanitary transportation rule covers shippers, loaders, carriers and receivers, with exemptions that include some fully enclosed food that does not need temperature control for safety. Your food safety team should confirm how the rule applies to your product and what you need to tell the carrier.

Alcohol is shippable but regulated. Throughline can quote and move it, and the team confirms licensing and permits before pickup. Federal hazardous materials rules treat some high-proof products differently from beer and wine, so state the product and proof when you ask for a quote. Hazmat freight is priced by the team rather than the model.

Plan for retail and distributor receivers

Beverage loads often deliver to grocery and distributor warehouses that run on strict appointments. Holiday weeks and hot-weather promotions can fill those schedules quickly, so book the delivery before the truck search begins. Note whether a lumper is expected and who pays, since that is a common source of invoice disputes.

Throughline sends milestones at booking, pickup, delays and delivery, with a no-login tracking link for your receiver. When the POD is verified, your invoice arrives as one PDF with the POD and BOL attached.

What Throughline does and does not move

A quick way to check fit before you request a quote:

  • Packaged cans and bottles on dry van, when no temperature control is needed
  • Packaged product on reefer, with setpoint and mode, including protect from freeze
  • Alcohol, with licensing and permits confirmed before pickup
  • Not bulk liquid: no tanker or food-grade tank service
  • Not LTL: small shipments may suit partial service if the freight fits

Start with a lane estimate, then confirm the shipment details.

Price a beverage lane
What changes when we run your truckload

Less chasing. Fewer surprises.

The same five commitments on every load, starting with the one that matters most here.

The carrier on the rate con is the carrier that shows up.

Before any rate con goes out we check active authority, verify identity, require at least $100,000 cargo and $750,000 auto liability, and flag “paper” carriers. Carriers with an Unsatisfactory FMCSA safety rating or an active out-of-service order are never dispatched, and a Conditional rating needs a manager’s sign-off. Bank-detail changes wait 48 hours.

  • Checked before the rate con
  • 48-hour hold on bank changes

If your load is at risk, you hear first — with choices.

When a truck isn’t confirmed as pickup nears, we email up to three options you can click: approve a revised rate, move pickup a day, or switch to a team truck. If a booked carrier misses pickup or drops the load, we start re-sourcing.

  • One-click choices by email
  • Re-sourcing on a no-show or fall-off

Stop asking where the truck is.

You hear when the carrier is booked, at pickup with the driver’s name and mobile, if it’s running late, at delivery, and when the POD is on file. Updates carry a no-login tracking link you can forward to your receiver, and a brief of your freight lands every Monday.

  • Driver name and mobile at pickup
  • No-login link for your receiver

Keep emailing your loads. We’ll take it from there.

Send tenders, quote requests or lane spreadsheets the way you do today. They become priced quotes and loads, and every tender gets a clear accept or decline.

  • No new portal to learn first
  • Clear accept / decline on tenders

Invoice and POD in one file.

When the POD is verified, your invoice arrives as one PDF with the POD and BOL attached. Your AP team gets the paperwork with the bill instead of asking for it.

  • Invoice + POD + BOL
  • Raised on delivery

“Hold for me” is the default: no carrier is booked on your load without your OK. A firm quote stays good for 3 days. After that we refresh it, and live truck options can change the price.

Straight answers

Questions shippers ask

Talk to a person
01

How much can a beverage truckload weigh?

+

Federal limits on the Interstate system are 80,000 pounds gross, 20,000 on a single axle and 34,000 on a tandem, subject to the bridge formula and state rules. The truck’s own weight comes out of that gross total, so ask for a payload check on your equipment.

02

Why does my beverage load weigh out before the trailer is full?

+

Liquids are dense. A trailer can reach its legal weight well before its floor is covered, so you may ship fewer pallets than the trailer could physically hold.

03

Do canned drinks need a reefer in winter?

+

Often they need protection on cold lanes, depending on the product, route and forecast. A reefer in protect-from-freeze mode can keep the load above freezing. Follow your own quality guidance on the temperature range.

04

Can Throughline ship beer, wine or spirits?

+

Yes, with conditions. Alcohol is regulated, so the team confirms licensing and permits before pickup. Give the product and proof when you request a quote, since some high-proof products can fall under hazardous materials rules.

05

Do you ship bulk beverages in tankers?

+

No. Throughline does not broker bulk liquid or tanker freight. It arranges packaged beverages in vans and reefers.

06

Does the FDA sanitary transportation rule apply to packaged beverages?

+

It depends on the product. The rule includes an exemption for food completely enclosed by a container, unless it needs temperature control for safety. Have your food safety team confirm how it applies to your product.

07

What should I send for an accurate beverage quote?

+

Send the lane, product, gross weight, pallet count, stacking, equipment and delivery appointment. Include freeze protection or alcohol details early, as both can change the equipment, the price or the paperwork.

A person approves the carrier

Price one real lane. No login.

Get my quote
Get my quoteCreate account