Coil · Sheet · Plate · Structural · Bar · Pipe

Truckload shipping for steel and metals shippers

Metals are some of the heaviest, most securement-sensitive truckloads on the road. A coil that shifts, a bundle that arrives wet or a load that scales overweight is a claim, a rejected delivery or a safety problem. Throughline brokers full truckloads of steel and metal products on flatbed, step deck and dry van, captures the weight, securement and tarp requirements with the load, and checks every carrier before the rate con.

No platform fee. No login required to estimate a lane. Nothing is booked without approval.

Licensed freight broker · MC-1819296 · USDOT 4573052 · $75,000 BMC-84 bond(855) 916-5957

For an accurate quote

Have these ready

  • Origin and destination, and the loading and unloading method (crane, forklift, side or end)
  • Product form, piece count, piece weights and total weight
  • Dimensions, and for coils the width, diameter and eye orientation
  • Tarp requirement and securement: chains, straps, coil racks, edge protection, dunnage
  • Loading window, delivery appointment and any site rules or PPE
Start my quote

Which trailer metals need

Product form, finish and how the receiver unloads decide the trailer:

  • Flatbed: hot-rolled coil, plate, structural shapes, rebar, bar and pipe — anything unloaded by crane or forklift from the side or top
  • Flatbed with coil racks or a coil well: steel coils, which need specific blocking and chaining so they cannot roll or shift
  • Tarped flatbed: cold-rolled, galvanized, coated or polished product that must stay dry but still loads from the side or top
  • Step deck: taller bundles or fabricated pieces that would be over height on a standard flatbed
  • Dry van: boxed or palletized metal products, wire, fasteners and smaller coils that a dock forklift can handle

What goes wrong on metals loads — and how to prevent it

Weight is the first problem. Metals reach legal gross weight long before they fill a trailer, so the piece weights, the total and how the load is spread over the axles all matter. A bill of lading that understates weight leads to an overweight ticket or a load that has to be reworked at the scale.

Securement is the second. Federal cargo securement rules include a section written specifically for metal coils, and shippers and receivers often add their own requirements for chains, straps, edge protection and dunnage. Rust and water damage are the third: finished product that arrives wet can be rejected outright.

Throughline asks for the commodity, piece weights, dimensions, coil orientation, tarp and securement requirements when you request the quote and keeps them attached to the load through carrier review, so the carrier that gets approved has the right trailer and equipment. Tarping and other known accessorials are priced as separate lines on top of the linehaul.

Capacity and timing

Metals shippers usually compete for the same flatbed trucks as construction, machinery and agricultural freight, so flatbed capacity tends to tighten in spring and summer and loosen in winter. Mills and service centers also ship on tight loading windows, and a truck that misses its slot can wait a day for the next one.

Throughline’s instant estimate shows a plain-language capacity read for the lane — tight, balanced or loose — next to the estimate and its confidence level. When a truck is not confirmed as pickup nears, you get options by email rather than a surprise at the gate.

Who this is for

Steel and aluminum mills, metal service centers and distributors, pipe and tube producers, and fabricators that ship full truckloads every week — to other service centers, OEM plants, fabricators and construction projects. Before any rate con goes out, we check active FMCSA authority and carrier identity, require at least $100,000 cargo and $750,000 auto liability insurance, match the carrier's phone to its FMCSA record, and screen against a library of known fraud patterns. Anything that can't be confirmed goes to a person — it doesn't go through. Carriers with an Unsatisfactory FMCSA safety rating or an active out-of-service order are never dispatched, and a Conditional rating needs a manager’s sign-off.

Start with a lane estimate, then confirm the shipment details.

Price a metals lane
What changes when we run your truckload

Less chasing. Fewer surprises.

The same five commitments on every load, starting with the one that matters most here.

The carrier on the rate con is the carrier that shows up.

Before any rate con goes out we check active authority, verify identity, require at least $100,000 cargo and $750,000 auto liability, and flag “paper” carriers. Carriers with an Unsatisfactory FMCSA safety rating or an active out-of-service order are never dispatched, and a Conditional rating needs a manager’s sign-off. Bank-detail changes wait 48 hours.

  • Checked before the rate con
  • 48-hour hold on bank changes

If your load is at risk, you hear first — with choices.

When a truck isn’t confirmed as pickup nears, we email up to three options you can click: approve a revised rate, move pickup a day, or switch to a team truck. If a booked carrier misses pickup or drops the load, we start re-sourcing.

  • One-click choices by email
  • Re-sourcing on a no-show or fall-off

Stop asking where the truck is.

You hear when the carrier is booked, at pickup with the driver’s name and mobile, if it’s running late, at delivery, and when the POD is on file. Updates carry a no-login tracking link you can forward to your receiver, and a brief of your freight lands every Monday.

  • Driver name and mobile at pickup
  • No-login link for your receiver

Keep emailing your loads. We’ll take it from there.

Send tenders, quote requests or lane spreadsheets the way you do today. They become priced quotes and loads, and every tender gets a clear accept or decline.

  • No new portal to learn first
  • Clear accept / decline on tenders

Invoice and POD in one file.

When the POD is verified, your invoice arrives as one PDF with the POD and BOL attached. Your AP team gets the paperwork with the bill instead of asking for it.

  • Invoice + POD + BOL
  • Raised on delivery

“Hold for me” is the default: no carrier is booked on your load without your OK. A firm quote stays good for 3 days. After that we refresh it, and live truck options can change the price.

Straight answers

Questions shippers ask

Talk to a person
01

What is the best way to ship steel coils by truck?

+

On a flatbed equipped for coils — racks or a coil well, with the blocking and chains the federal securement rules call for — and tarped if the coil is finished product that must stay dry. Give the broker the coil weight, width, diameter and eye orientation so the right carrier and trailer are booked.

02

What is the difference between eye-to-sky and eye-to-side steel coils?

+

It is how the coil sits on the trailer. Eye to sky (eye vertical) means the coil stands on its flat side with the hole facing up; eye to side means it sits on its rounded edge with the hole facing the side or the rear, cradled in a coil rack or well. The federal metal-coil securement rules set different chain and blocking requirements for each, so state the orientation and coil weight with the quote request.

03

Do you ship steel and metals on tarped flatbeds?

+

Yes. Throughline brokers flatbed and step deck truckloads, with or without tarps. Ask for tarping on the quote request, with the tarp type and size, so it is part of the quote and travels to the carrier with the load.

04

How much steel fits on one truckload?

+

Usually the weight limit is reached before the trailer is full, so the answer depends on the tractor and trailer weight and the state rules on the route. Send the piece and total weights with the quote request and the load is matched to equipment that can carry it legally.

05

Can you move aluminum, copper or stainless?

+

Yes. Non-ferrous and stainless products move the same way as steel on flatbed, step deck or dry van. Because finish damage is costly, flag any tarp, edge protection or no-chain-contact requirement when you request the quote.

06

Do you handle oversize or permitted metals loads?

+

Throughline books legal-size truckloads. Long or tall product that fits within legal limits on a step deck is often the simplest answer, so send the dimensions. Permitted oversize and project cargo are better served by a specialized heavy-haul desk, and we will say so rather than quote it.

07

How do you make sure the carrier is legitimate?

+

Every carrier is checked for active FMCSA authority, identity, insurance minimums, safety rating and known fraud patterns before a rate confirmation goes out, and a person approves it. High-value metals loads are a common fraud target, so a carrier that cannot be confirmed goes to a person instead of onto your load.

A person approves the carrier

Price one real lane. No login.

Get my quote
Get my quoteCreate account