Flatbed · Step deck · Tarps · Full truckload and partial

Flatbed and step deck truckload shipping

Flatbed shipping is for freight that cannot go through a trailer’s rear doors: steel, lumber, building materials, pipe and machinery that load from the side, the top or with a crane. A step deck is a flatbed with a lower rear deck for taller freight. Without permits, freight on either must stay within about 8.5 feet wide, 13.5 feet high overall and 80,000 pounds gross for the whole truck. Throughline brokers flatbed and step deck full truckloads and partial deck loads, with the tarp, securement and unloading needs carried to the carrier.

No platform fee. No login required to estimate a lane. Nothing is booked without approval.

Licensed freight broker · MC-1819296 · USDOT 4573052 · $75,000 BMC-84 bond(855) 916-5957

For an accurate quote

Have these ready

  • Origin and destination, with loading and unloading method (forklift, crane, ramp)
  • Length, width and height of the freight, and total weight
  • Flatbed or step deck, if you know which you need
  • Tarp type and size, if the freight must stay dry
  • Securement the carrier must bring: chains, straps, edge protection
Start my quote

Flatbed or step deck?

A standard flatbed has one deck height and the widest choice of trucks, so it is the default for steel, lumber, pipe and most building products. A step deck drops the rear deck closer to the road, which gives tall freight more room under the legal height limit. That is why tall machinery, equipment and some stacked building products ride a step deck.

Step deck capacity is thinner than flatbed, so on secondary lanes plan a day ahead. Both trailers load from the side, the top or the ground, and a step deck can also take ramp-loaded equipment.

Legal size and when permits come in

Throughline checks each piece on an open-deck load against the federal legal envelope: 102 inches wide, 13 feet 6 inches high including the trailer and 53 feet long, with the truck at 80,000 pounds gross. A piece past the width, height or length limit is flagged as oversize before a carrier is sourced, and you confirm it, because it may need state permits and escorts. Permitted oversize and project cargo are better served by a specialized heavy-haul desk, and Throughline will say so rather than quote it.

Send the real dimensions and weight with the quote. A load quoted on guessed dimensions is the one that turns out to be over height at pickup.

Tarps, securement and partial deck loads

Freight that must stay dry needs tarps, and the quote form takes the tarp type and size: lumber, steel, smoke or coil tarps, in 4, 6 or 8 foot drops. Tarps can only be ordered on open-deck equipment, so a tarp request cannot end up on a van by mistake. Say what the carrier must bring for securement, such as chains, straps, edge protection or dunnage.

Not every flatbed load fills the deck. Partial deck loads are routine on flatbed and step deck, and they are priced by the length of deck they use, so send the length of the freight as well as its weight.

  • Steel coils, plate, beams and pipe
  • Lumber, trusses, panels and other building materials
  • Machinery and equipment within legal size
  • Precast, landscaping and construction products

How a flatbed load runs with Throughline

Start on the quote page for an instant all-in estimate with a low-to-high spread and a confidence level, email the load with drawings or a packing list, or send a lane spreadsheet for repeat lanes. Flatbed capacity tightens sharply in construction season, so give lead time in spring and summer. A firm quote stays good for 3 days. After that we refresh it, and live truck options can change the price. “Hold for me” is the default: no carrier is booked on your load without your OK.

Before any rate con goes out, we check active FMCSA authority and carrier identity, require at least $100,000 cargo and $750,000 auto liability insurance, match the carrier's phone to its FMCSA record, and screen against a library of known fraud patterns. Anything that can't be confirmed goes to a person — it doesn't go through.

After booking you hear when the carrier is assigned, at pickup with the driver’s name and mobile, if the load is running late, at delivery and when the POD is on file. When the POD is verified, your invoice arrives as one PDF with the POD and BOL attached.

Start with a lane estimate, then confirm the shipment details.

Quote a flatbed load
What changes when we run your truckload

Less chasing. Fewer surprises.

The same five commitments on every load, starting with the one that matters most here.

The carrier on the rate con is the carrier that shows up.

Before any rate con goes out we check active authority, verify identity, require at least $100,000 cargo and $750,000 auto liability, and flag “paper” carriers. Carriers with an Unsatisfactory FMCSA safety rating or an active out-of-service order are never dispatched, and a Conditional rating needs a manager’s sign-off. Bank-detail changes wait 48 hours.

  • Checked before the rate con
  • 48-hour hold on bank changes

If your load is at risk, you hear first — with choices.

When a truck isn’t confirmed as pickup nears, we email up to three options you can click: approve a revised rate, move pickup a day, or switch to a team truck. If a booked carrier misses pickup or drops the load, we start re-sourcing.

  • One-click choices by email
  • Re-sourcing on a no-show or fall-off

Stop asking where the truck is.

You hear when the carrier is booked, at pickup with the driver’s name and mobile, if it’s running late, at delivery, and when the POD is on file. Updates carry a no-login tracking link you can forward to your receiver, and a brief of your freight lands every Monday.

  • Driver name and mobile at pickup
  • No-login link for your receiver

Keep emailing your loads. We’ll take it from there.

Send tenders, quote requests or lane spreadsheets the way you do today. They become priced quotes and loads, and every tender gets a clear accept or decline.

  • No new portal to learn first
  • Clear accept / decline on tenders

Invoice and POD in one file.

When the POD is verified, your invoice arrives as one PDF with the POD and BOL attached. Your AP team gets the paperwork with the bill instead of asking for it.

  • Invoice + POD + BOL
  • Raised on delivery

“Hold for me” is the default: no carrier is booked on your load without your OK. A firm quote stays good for 3 days. After that we refresh it, and live truck options can change the price.

Straight answers

Questions shippers ask

Talk to a person
01

What is flatbed freight shipping?

+

Flatbed shipping moves freight on an open trailer with no sides or roof, so it can be loaded from the side, the top or with a crane. It is used for steel, lumber, pipe, building materials and machinery that cannot go through a van’s rear doors.

02

What is the difference between a flatbed and a step deck?

+

A step deck has a lower rear deck, so taller freight stays under the legal height limit. A standard flatbed has one deck height and more trucks available. Use a step deck for tall machinery and equipment, and a flatbed for most steel, lumber and building materials.

03

What are the legal size limits for flatbed freight?

+

Without permits, a load generally must stay within 102 inches wide, 13 feet 6 inches high including the trailer, 53 feet long and 80,000 pounds gross. States vary. Throughline checks each piece against these limits and flags anything past them as oversize before a carrier is sourced.

04

Do I need tarps for flatbed freight?

+

If the freight must stay dry or clean, yes. Lumber, finished steel and packaged building products usually ship tarped. On Throughline’s quote form you can choose lumber, steel, smoke or coil tarps in 4, 6 or 8 foot drops.

05

Can I ship a partial flatbed load?

+

Yes. Partial deck loads are routine on flatbed and step deck and are priced by the length of deck they use. Send the freight’s length, width, height and weight with the quote request.

06

Does Throughline book oversize or permitted loads?

+

Throughline books legal-size flatbed and step deck loads. A piece past the legal width, height or length is flagged as oversize, because it needs state permits and sometimes escorts. Permitted oversize and project cargo are better served by a specialized heavy-haul desk, and Throughline will say so rather than quote it.

A person approves the carrier

Price one real lane. No login.

Get my quote
Get my quoteCreate account