Fuel surcharge · Diesel index · All-in vs linehaul plus fuel

What is a truckload fuel surcharge, and how is it calculated?

A truckload fuel surcharge is the part of a freight price that moves with the cost of diesel. It is usually calculated from a published weekly diesel price, most often the U.S. Energy Information Administration’s on-highway diesel average: when that price is above an agreed base price, the surcharge goes up by a set amount per mile, and when diesel falls, it comes down. Some prices include fuel in one all-in number instead. Throughline’s instant estimate is an all-in price for the lane, so there is no separate fuel line to add.

No platform fee. No login required to estimate a lane. Nothing is booked without approval.

Licensed freight broker · MC-1819296 · USDOT 4573052 · $75,000 BMC-84 bond(855) 916-5957

For an accurate quote

Have these ready

  • Origin and destination, so the miles are known
  • Pickup date, which sets the diesel index week on a schedule
  • Equipment, weight and any accessorials
  • Whether you need an all-in price or linehaul plus fuel to match your system
  • Your current fuel schedule, if you have one, for repeat lanes
Start my quote

Why fuel is priced separately at all

Diesel is one of a carrier’s largest costs and the one that changes fastest. A rate agreed months ago for a contract lane would be unfair to one side or the other once diesel moved, so contract freight often splits the price in two: a linehaul rate that stays fixed for the term, and a fuel surcharge that resets on a schedule as diesel moves.

Spot freight is more often priced all-in, because the price is set for one load at today’s market and today’s diesel. Either way the truck burns the same fuel. The difference is only whether you see it as its own line.

How a fuel surcharge schedule works

Most truckload fuel schedules are built from four parts, agreed between shipper and carrier or broker before freight moves:

  • An index: usually the EIA weekly U.S. or regional on-highway diesel average, published each week
  • A base or peg price: the diesel price at which the surcharge is zero
  • A step: how much the surcharge changes for each move in the index above the base
  • A basis: a charge per loaded mile for truckload, or a share of the linehaul in some contracts
  • A reset rule: which week’s index applies, often the price published before the pickup date

Comparing quotes when fuel is split out

The most common mistake is comparing a linehaul-only rate from one provider with an all-in rate from another. Before you compare, put every quote on the same basis: add the fuel surcharge for the lane’s miles and the current index week to every linehaul-only quote, or ask every provider for an all-in number.

Then check that the quotes describe the same load: pickup date, equipment, weight and accessorials such as detention, driver assist or tarps. A quote that looks cheaper because it left fuel or a known accessorial out is not cheaper. Our guide to checking whether a truckload rate is fair walks through that comparison.

How Throughline handles fuel

The instant estimate on the quote page is an all-in price for the lane, with a low-to-high spread and a confidence level, so the number you see already reflects fuel at today’s market. A firm quote stays good for 3 days. After that we refresh it, and live truck options can change the price.

For repeat lanes on a customer contract, the contracted rate records whether fuel is included, so both sides know which basis the price is on. If fuel is ever billed separately, it appears on the invoice as its own labelled fuel surcharge line. When the POD is verified, your invoice arrives as one PDF with the POD and BOL attached.

Start with a lane estimate, then confirm the shipment details.

Get an all-in estimate
What changes when we run your truckload

Less chasing. Fewer surprises.

The same five commitments on every load, starting with the one that matters most here.

Invoice and POD in one file.

When the POD is verified, your invoice arrives as one PDF with the POD and BOL attached. Your AP team gets the paperwork with the bill instead of asking for it.

  • Invoice + POD + BOL
  • Raised on delivery

If your load is at risk, you hear first — with choices.

When a truck isn’t confirmed as pickup nears, we email up to three options you can click: approve a revised rate, move pickup a day, or switch to a team truck. If a booked carrier misses pickup or drops the load, we start re-sourcing.

  • One-click choices by email
  • Re-sourcing on a no-show or fall-off

The carrier on the rate con is the carrier that shows up.

Before any rate con goes out we check active authority, verify identity, require at least $100,000 cargo and $750,000 auto liability, and flag “paper” carriers. Carriers with an Unsatisfactory FMCSA safety rating or an active out-of-service order are never dispatched, and a Conditional rating needs a manager’s sign-off. Bank-detail changes wait 48 hours.

  • Checked before the rate con
  • 48-hour hold on bank changes

Keep emailing your loads. We’ll take it from there.

Send tenders, quote requests or lane spreadsheets the way you do today. They become priced quotes and loads, and every tender gets a clear accept or decline.

  • No new portal to learn first
  • Clear accept / decline on tenders

Stop asking where the truck is.

You hear when the carrier is booked, at pickup with the driver’s name and mobile, if it’s running late, at delivery, and when the POD is on file. Updates carry a no-login tracking link you can forward to your receiver, and a brief of your freight lands every Monday.

  • Driver name and mobile at pickup
  • No-login link for your receiver

“Hold for me” is the default: no carrier is booked on your load without your OK. A firm quote stays good for 3 days. After that we refresh it, and live truck options can change the price.

Straight answers

Questions shippers ask

Talk to a person
01

What is a fuel surcharge in trucking?

+

It is the part of a truckload price that moves with diesel prices. When a published diesel index is above an agreed base price, the surcharge rises by a set step, usually charged per loaded mile, and it falls when diesel falls. It lets the linehaul rate stay fixed while fuel cost changes.

02

How is a truckload fuel surcharge calculated?

+

Take the current weekly diesel index, usually the EIA on-highway average, compare it with the agreed base price, and read the surcharge for that gap from the schedule, typically an amount per loaded mile. Multiply by the lane’s miles to get the fuel charge for the load.

03

What diesel price index do fuel surcharges use?

+

Most U.S. truckload schedules use the Energy Information Administration’s weekly retail on-highway diesel price, either the national average or a regional one. It is published weekly, and contracts say which week’s price applies to a load.

04

What is the difference between an all-in rate and linehaul plus fuel?

+

An all-in rate is one number that already covers fuel. Linehaul plus fuel splits the price into a fixed linehaul rate and a fuel surcharge that changes with diesel. Neither is cheaper by itself; compare quotes only once they are on the same basis.

05

Does Throughline add a fuel surcharge to its quote?

+

No separate fuel line is added to the instant estimate. It is an all-in price for the lane, shown with a low-to-high spread and a confidence level. Contracted lanes record whether fuel is included, and any separately billed fuel appears as its own labelled invoice line.

06

Why did my fuel surcharge change from last week?

+

Because the diesel index it follows changed. Most schedules reset weekly from a published diesel price, so the surcharge on a load depends on which week’s index applied at pickup. Your contract or rate confirmation should say which index and reset rule were used.

A person approves the carrier

Price one real lane. No login.

Get my quote
Get my quoteCreate account